How to Use a Wireless Charging Pad with a Phone Case
By Juice_UK | Published: 2026-10-22
Category: How-to Guides
Learn how to charge your phone through a case using a wireless charging pad. Tips on thickness, materials, and alignment to avoid interruptions.
Quick answer
Yes, most wireless charging pads work through standard phone cases, but thickness, material, and placement matter. Follow a few simple checks to ensure reliable charging without removing your case.
Why phone cases can interfere with wireless charging
Wireless charging uses magnetic induction between the pad and your phone. A case adds a physical gap, and certain materials can block or weaken the signal. Thick, metal, or magnetically shielded cases are the most common culprits.
The Juice x Hype 10W Wireless Charging Pad – Graffiti, for example, is designed to charge through plastic cases up to a few millimeters thick. But if your case is bulky or contains metal, you may need to remove it.
When you might need to remove the case
Cases with built-in stands, card slots, or metal plates (like magnetic car mounts) often prevent charging. Similarly, very thick rugged cases or those with battery packs can create too much distance.
If your phone doesn't start charging within 5 seconds of placing it on the pad, try removing the case first. That's the quickest way to rule out interference.
Steps to charge through a phone case
- Check case thickness and material: Remove the case and measure its thickness. Most wireless pads work with cases up to 3 mm thick. Avoid cases with metal, magnets, or thick rubber. Plastic, silicone, and thin TPU cases are usually fine. If your case is thicker than 3 mm or contains metal, you'll likely need to remove it for charging.
- Place the phone correctly on the pad: Center the phone's charging coil (usually near the middle or lower half of the phone) over the pad's charging area. Many pads, including the Juice x Hype model, have an LED indicator that lights up when charging begins. If the LED doesn't light up within 5 seconds, adjust the phone's position. Misalignment is the most common mistake.
- Test with the case off if charging fails: Remove the case and place the phone on the pad again. If it charges without the case, the case is the problem. If it still doesn't charge, check the pad's power source or try a different cable. A case that works with one pad may not work with another due to differences in coil size and power output.
Product that works with most cases
- Juice x Hype 10W Wireless Charging Pad – Graffiti: The Juice x Hype 10W Wireless Charging Pad – Graffiti can charge through plastic phone cases without needing to remove them. You can keep your case on for everyday charging, saving time and reducing wear on the case.
Juice x Hype 10W Wireless Charging Pad – Graffiti
